+86 18725628355

KLD-O-S Online Oil Particle and Moisture Counter

KLD-O-S  Online Oil Particle and Moisture Counter

KLD-O-S is an on-line oil Particle Moisture counter of high accuracy. It adopts the principle of laser blockage method (laser shading method) to detect the size and quantity of solid particle and moisture in the oil. Based on the measurement, it does the


  • Product No.: KLD-O-S

Details

Introduction:KLD-O-S is an on-line oil Particle Moisture counter of high accuracy. It adopts the principle of laser blockage method (laser shading method) to detect the size and quantity of solid particle and moisture in the oil. Based on the measurement, it does the analysis and displays the oil contamination level in various standards (e.g NAS1638, ISO4406, GJB) so as to help the operator be aware of the potential risks and thereby avoid the evitable wear of parts.

KLD-O-S is able to give out the result within 45 sec. An optical fiber cable goes along with the counter to connect the instrument to a PC or display screen to transfer data. KLD-O-S can be widely applied to various kinds of oil, such as hydraulic oil, lubricant oil, gearbox oil, insulating oil (transformer oil), UCO etc. Due to its small size and light weight, it can be easily installed on machines that consist of hydraulic system or lubricant circuit, etc. Therefore, the continuous real time monitoring of the oil quality will be available.

Features:

1. High sensibility. Able to detect the particle  as small as 1μm, and moisture as 1ppm.

2. Multiple standards available: NAS 1638, ISO4406, GJB.

3. Efficient. Displayed data is to be updated every 10 sec.

4. Durable. 24 hours continuous real-time monitoring of oil status, maintenance-free.

5. Very small flow rate required. When working online, as little as 50 ml flow rate is adequate. Little influence on hydraulic or lubricant circuit.

6. Optical fiber attached. Data can be transferred to a PC if needed.

7. Compact and rugged.

8. Easy installation. Could be installed within a few minutes.

Data:

Weight

589g

Dimension

105mm×89mm×64 mm

Fluid Temperature Range

-10℃~80℃

Operating Ambient Temperature

-20-60 °c

Relative Humidity

0-300 cst

Viscosity Range

0-300 cst

Channels

4

Particle Size

NAS 1638:2,5,15,25, 50, 100 μm

ISO:4406: 4,6,14,21, 38,70 μm

Moisture Content

1~200ppm

Particle Moisture Counter Accuracy

+/- half an ISO/NAS code

Typical test time

10 secs

Contamination Class

NAS1638 00-12

ISO4406 01-29

Operating Flow Rate

50-300 ml/min

Moisture  Range of Measurement

0…100 % ( 0…1000 PPM)

Moisture Sensor Accuracy

±3 %  r.H

Operating Pressure

0.15-1 Mpa

Calibration

Based on ISO MTD (ISO11171:2000)

Power Supply

9—36VDC

Hose Connection

M10×1mm

Inquiry

INQUIRY NOW
  •  
  • * (All * must be filled in)

Related Products